Electronics : Search |
|
|
SHURE A50D MICROPHONE DRUM MOUNT»rank:from: Shure IncorporatedShure Incorporated: :Quickly becomming the most popular mount of professionals. Use the Shure A50D to mount a microphone onto a drum. A screw on the mount secures the microphone, and an adaptive brass washer (european insert) is available to accommodate an even wider range of microphone models. The flexible, yet sturdy, rubber construction provides stability and ease of installation. |
|
Shure WL183 Lavaliere Mic»rank:from: ShureShure: :Electret condenser microphone designed for use with a wireless body-pack transmitter. This microphone has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. The furnished tie clip can be rotated in 90 degree intervals for placement flexibility.The omnidirectional WL183 is recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle is 360 degrees. |
|
Shure RPW118 Wireless Beta 58A Cartridge, Assembly & Grille»rank: 8332from: Shure
Shure
: :Electret condenser microphone designed for use with a wireless body-pack transmitter. This microphone has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. The furnished tie clip can be rotated in 90 degree intervals for placement flexibility.The omnidirectional WL183 is recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle is 360 degrees. |
|
Shure UA820A 1/2-Wave Dipole Antenna»rank: 8332from: ShureShure: :1/2-Wave Dipole Antenna, for U4S, U4D and UC4 recievers, 774-865MHz. |
|
Shure A96F Camcorder Interface - Microphone cable - 3 pin XLR (F) - mini-phone 3.5 mm (M) - 2 ft»rank: 8332from: Shure IncorporatedShure Incorporated: :This transformer connects microphones with an XLR-type connector to the 3.5 mm (9/64 inch) inputs found on camcorders and other recording devices. lt increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the d.c. bias typically found in camcorder microphone inputs. The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. Specifications: • Frequency Response: 20 ... |
|
Shure SCL4 Single Low Mass High Energy Drive Earphone - White»rank: 8332from: Shure IncorporatedShure Incorporated: :The lightweight and compact SCL4 provides high-definition audio with sound isolation. lt also features unique, balanced armature drivers for brilliant highs and tuned port for extended bass. |
|
Shure Beta 91 Kick Drum Microphone»rank: 8442from: Shure
Shure Incorporated
: :For kick drums and other bass instruments, nothing compares to the Shure Beta 91. The Beta 91 condenser cartridge combines superior 'attack' and 'punch' for studio quality sound even at the extremely high sound pressure levels encountered inside a kick drum. lts boundary effect design produces a strong, solid low-end response that has been specifically tailored for heavy bass applications. |
|
Shure M44G DJ Cartridge for Scratching and Mixing»rank: 8442from: ShureShure: :Revived exactly the same as the original, this companion to the M44-7 provides an ideal balance between skip resistance and accuracy of sound reproduction for entertainment purposes. The M44G is a versatile performance needle, appropriate for both intensive scratching and mixing.With a tracking force of 0.75 to 1.50 grams, and a frequency response which is essentially flat from 20 to 20,000 Hz, the M44G produces a vibrant, high-definition sound. With the same unique Shure Type S cantilever as used on the M44-7, ... |
|
Shure N25C Stylus for M25C Fundamental Phono Cartridge, Single»rank: 9094from: Shure
Shure
: :Replacement stylus for Shure M25C Cartridge. |
|
Shure PA758L Large Ultra-Soft Flex Sleeves for Shure E1c, E3c, and E5c Sound-Isolating Earphones (5 Pairs)»rank: 9094from: Shure IncorporatedShure Incorporated: :Because every ear is different, Shure sound isolating earphones come with a broad assortment of sleeves to ensure a personalized fit, as well as to ensure proper sound isolation. Shure reusable flex sleeves fit comfortably in the ear and allow for ease of insertion. |


